Dave R
Junior Member
Posts: 460
|
Post by Dave R on May 21, 2017 12:00:19 GMT -5
Going to be SBRing an Arsenal SLR104-51 once the paper work comes through.
It already has threading at the desired length, so all that's left is to cut and crown.
Do any of you have any advice on best methods and the ones to avoid? Any tools I should absolutely buy?
I'll be buying some cheap used 74 barrels to practice on.
|
|
ulf
New Member
Posts: 106
|
Post by ulf on May 21, 2017 16:31:53 GMT -5
Check with Dinzag Arms - I believe he still rents tools and he would be a good source of advice.
Don't forget cutting fluid - and don't ask me how I know!
An 11 degree target crown will be a BIG help in the accuracy department.
|
|
ulf
New Member
Posts: 106
|
Post by ulf on May 22, 2017 8:42:38 GMT -5
You might also want to take a look over at Saiga-12.com for threads on this topic. They tend to be pic heavy and DIY friendly.
|
|
Dave R
Junior Member
Posts: 460
|
Post by Dave R on May 22, 2017 16:46:46 GMT -5
Danzig seems to have everything Ill need besides the saw. Thanks.
|
|
ulf
New Member
Posts: 106
|
Post by ulf on May 22, 2017 20:46:38 GMT -5
Good deal! He's a good guy and easy to deal with.
|
|
|
Post by eddiewouldclearhot on Jun 17, 2017 10:11:31 GMT -5
you may find this helpful...
|
|